C.A 6133 AMRA Chauvin Arnoux P01146013

Earth measurement using the traditional method (3P) or via earth loop impedance
Continuity test at 0.2 A
Insulation test
RCD test: threshold and trip time
Automatic test sequences
Test result storage
Android app for report generation
Powered by rechargeable batteries with charging via mains connection, USB port, or cigarette lighter

Ergonomic design
Complete and lightweight, the C.A 6133 device is also very easy to use. The buttons on the front panel each correspond to a different function. The ergonomic design ensures comfortable use in all conditions:

table support
magnetised casing for magnetic mounting
4-point shoulder strap for hands-free use without any effort
backlit display for optimal readability even in low light conditions
terminal block with clear and unambiguous identification (connections L, N, PE, H, S, E, +, com) to avoid wiring errors
remote control sensor to start tests remotely
triple cable for direct measurements on 2P+T sockets

Measurements
The multifunction tester C.A 6133 features cable compensation to always obtain reliable values. It is suitable for measuring voltage, continuity, resistance, insulation, loop impedance, and current (using an external clamp) and can also be used to determine phase rotation. Tests on type A and AC residual current devices can be performed in either ramp or pulse mode.

Particularly effective, the C.A 6133 provides an immediate visual indication of the test result (pass or fail).
The multifunction tester C.A 6133 also saves valuable time by starting automatic test sequences and storing results. For example, you can save a sequence such as AUTO LOOP – RCD – MΩ. Field operations become extremely fast by activating a control campaign that can include 6 to 8 sequential tests!
Additionally, the dedicated IT Report Android app for electrical system inspections allows downloading test results via Bluetooth as well as generating and viewing measurement reports.

Main technical features:
Voltage measurement: 550 VAC / 800 VDC
Continuity at 200 mA
Resistance from 1 to 99.99 kΩ
Insulation: test voltage 250 V, 500 V, 1,000 V
Loop impedance Zs (Z L-PE) without RCD trip: from 1 to 2,000 Ω, calculation of Ik value
Loop impedance Zs at high current (Z L-PE) with RCD trip and Zi (Z L-N or Z L-L): from 0.1 to 400 Ω, calculation of Ik value
RCD types AC and A: 30 mA, 100 mA, 300 mA, 500 mA, 650 mA
RCD pulse mode: trip time
RCD ramp mode (30 mA): trip current
Phase rotation: from 45 to 550 V; from 45 to 65 Hz
Frequency measurement: 30 Hz to 999.9 Hz
Insulation: additional test voltage at 1,000 V
Earth 3P (stake): up to 2,000 Ω
Automatic RCD test sequences: no trip – pulse – ramp
Automatic test sequences: loop – RCD – MΩ
Memory: 30 sites x 99 tests with MEM button or optional remote control sensor
Powered by rechargeable batteries with built-in charger
Charging via mains socket, USB port, or cigarette lighter
Bluetooth communication
Automatic recognition of external clamp MN 73A (optional)