UPS EVO DSP PLUS 1200 Rack/Tower IEC Together ON

EVO DSP PLUS 1,200 RACK TOWER Uninterruptible Power Supply - Power 1,200 VA PF 0.9. On-Line (VFI) DSP Technology, 94% Efficiency, Input/Output 230/230Vac 50/60Hz, IEC Output Sockets. Complete protection against blackout, voltage fluctuations (overvoltages and undervoltages), lightning (with upstream surge arrester), frequency variations, surges, harmonics, voltage distortions. Recommended for Data Centres, Local Area Networks (LAN), Electromedical devices, Industrial processes, Virtual servers, Pellet stoves, Thermo-fireplaces, Domestic heating boilers. Convertible format (19” Rack or Tower) with adjustable display. Hot Swap batteries. Smart slot for SNMP card or Dry Contact. Transformerless On-Line Double Conversion Technology (VFI-SS-111). Active PFC Circuit (0.99). Compatibility with generator sets. Battery charging system managed by microprocessor. Static bypass. Technical data • Code: FGCEDP1202RTIEC • Nominal power: 1,200 VA • Active power: 1,080 W • Power factor: 0.9 • Technology: Transformerless On-Line Double Conversion (VFI-SS-111) • Cooling: Forced air via fan • Noise level: < 45 dBA at 1 m • Positioning: Tower position or 19’’ rack cabinet (2U) • UPS dimensions LxHxD: 43.8 x 8.8 x 31 cm • Dimensions with packaging LxHxD: 50 x 18 x 40 cm • Weight: 12 Kg Input • Number of phases: 1F+N • Nominal voltage: 208Vac/220Vac/230Vac/240Vac • Input voltage tolerance: 110-300Vac • Nominal frequency: 50/60 Hz (selectable) • Input frequency tolerance in On-Line mode: +/- 7% • Input power factor: 0.99 Output • Number of phases: 1F+N • Nominal voltage: 208Vac/220Vac/230Vac/240Vac (selectable) • Voltage stability at 100% linear load (On-Line and Battery mode): ±1% • Voltage harmonic distortion THD: <2% (with linear load), <8% (with non-linear load) • Crest factor: 3:1 • Frequency: 50/60 Hz (selectable) • Frequency stability: ±0.2 Hz • Waveform: Inverter Sinusoidal • Allowed overload: 110% acoustic alarm only, 110-130% for 30 s, >130% for 100 ms • Efficiency: 94%, calculated in double conversion mode at 100% load according to standard 62040-3 • Response time: 0 ms (On-Line) Battery • Type: Sealed, maintenance-free lead acid • Typical autonomy: 10-30 min • Autonomy extensions: No Operating environmental conditions • Operating temperature: From 0 to 55 °C (for proper battery operation from 20 to 25 °C) • Relative humidity: < 95% non-condensing • Maximum altitude: 3000 m • Protection rating: IP20 Certifications: CE (Reference standards: safety IEC EN 62040-1; EMC IEC EN 62040-2; classification IEC EN 62040-3)